Ultra-sound humidifier fogger Maxi 2,2l REPTI PLANET

The compact ultrasonic mist generator and humidifier is ideal for animals requiring a humid environment.
Adjustable fog generator control (up to 250 ml per hour).
Elastic hose with adjustable length from 45 cm to 150 cm.
Protection against "dry" work, the device is turned off when the tank is empty.
It can be installed in many environments, e.g. vivariums, aquariums, cages, terrariums, in tanks made of plastic / PVC / acrylic / glass.
Ideal for a wide range of reptiles and amphibians, including: bearded agamas, geckos, snakes, turtles, iguanas, lizards, chameleons, frogs, crabs...

Includes
(A) Humidifier body
(B) Humidifier tank
(C) Flexible hose with suction cups

Description Fogger / Humidifier
1. Remove all packaging items. Place the humidifier body (A) in an easily accessible place next to or near the terrarium.
2. Before use, unscrew the valve on the black bottom of the humidifier tank (B) and rinse the tank with a small amount of soapy water. Then the tank should be thoroughly rinsed until the soap is completely removed.
3. Fill the humidifier tank (B) with a maximum of 2 liters of water. Turn the valve back on until it is tightly closed.
4. Place the humidifier tank (B) in the body (A). Double-check that the humidifier tank has been correctly installed on the body.
5. Place the larger end of the flexible hose (C) on the black tube of the humidifier tank.
6. Stretch the hose (C) to the desired length and place the end in / on top or side of the terrarium. Arrange the suction cups along the hose and glue them to the walls of the terrarium.
7. Connect the device to power. Turn on the switch located on the back of the humidifier body (A) to the "on" position. Using the knob on the front of the device, set the desired performance. It may take a few seconds after setting the knob to increase/decrease the performance of the device.

Parts List
1. Main body of the device
2. Flexible hose
3. Connector
4. Tank cover
5. Suction cups
6. Water tank

Basic parameters
Maximum power: 32W
Voltage: 220V
Frequency: 50Hz
Maximum capacity: 2.2 l
Maximum yield 250 ml / h

Installation

1. Position the humidifier horizontally in the right place, remove the water tank (6), unscrew the water tank cover and fill it with water. The water temperature must not exceed 40 ° C. After the filling with water is completed, remove the water droplets from the tank and then reconnect to the main unit (1) (see Figure 1).
2. Fit the tank cover (4) to the top of the water tank as shown in Figure 2.
3. Connect the connecting part (3) to the water tank cover (4) as shown in Figure 3.
4. Connect the flexible hose (2) to the connecting part (3) as shown in Figure 4.
5. Attach the suction cups on the glass (5) to the flexible hose (2) follow Figure 5 and determine the appropriate length of the flexible hose.
6. Attach the suction cups to the side or back of the terrarium, as shown in Figure 6, and place the outlet hole of the flexible hose towards the inside of the terrarium. Reduce hose folds as much as possible. Its damage may cause the flow of generated fog from the machine body to disappear.
7. Connect the power supply of the unit with current parameters of 220 / 50Hz and set the switch on the body of the device to the "On" position.
8. Using the adjusting knob for the intensity of the fog output, adjust its amount to your needs.
9. The product is equipped with protection against water shortage and "dry" operation. When the water tank is empty, the sensor disconnects the fan and transformer. As a result, no fog escapes from the flexible hose, and the indicator light turns red. If you want to continue the operation of the device, turn off the power supply, and then replenish the water into the tank.

Service – Warnings

1. Do not pour hot water with a temperature above 40 ° C into the water tank to avoid deformation of the engine components.
2. Do not pour water directly into the water tank if the tank is installed on the main unit.
3. Do not put metal objects in the tank, do not pour chemicals and detergents
4. Remove water from the tank if the ambient temperature is below 0°C. Ice may cause damage to the device.
5. Do not move the device during its operation.
6. If the device is not used for a long time, turn it off and unplug the power.

Safety Warnings

1. Do not disconnect the plug with wet hands, it may cause electric shock
2. If the device is overturned, turn off the power first, only after this action set the device in the correct position
3. Do not disassemble the body of the device, it may cause electric shock
4. Protect the power cord from damage, do not adjust its length and avoid bending it. Do not overload the power cord with heavy objects. Damage to the power cord can cause an electric shock, short circuit or fire.
5. Do not allow children to operate the device.
6. This device is intended for indoor use only.
7. Do not replace the power cord. If the power cord is damaged, stop using the device, disconnect it from the power supply and replace it with a defect-free product.

Cleaning and maintenance

1. The water tank should be cleaned once every two to three weeks
Remove the water tank and clean with a soft cloth. Then rinse the tank with clean water.
2. Cleaning of sediments from water (water stone)
If there are accumulated deposits from water on the inner surface of the device (water stone), use special cloths to remove them.
3. External cleaning of the humidifier.
Use hot water with a temperature below 40 ° C and wipe the surface with a soft cloth

If you do not use the device for a long time, rinse, dry, put in the original packaging and store in a dry place.

Remember:
Sharp tools must not be used to clean the body of the device. These parts can only be cleaned with special cloths or a soft brush.
Do not use fabrics impregnated with solvents, gasoline or other chemicals that could damage the surface of the device.
Do not use detergents for cleaning. We recommend rinsing with clean water.
Do not allow water to get into the device during cleaning. Protect against moisture entering the internal electrical components, as this may be the cause of failure.
Do not delete individual parts of the device.